Now imagine what kind of scenario a (middle-stream) intermediate extrusion product smart production line should be. First of all, the entire production line should be under the command of the voice-activated and digital buttons. As long as the patrol engineer shouts out the production line name “30MN Extruder and starts production of the 12th product”, or press the “1-2” button, the production line will press “ The 12th product's process parameters produce qualified products. If you want to change to produce the "15th product", as long as the inspection engineers say "30MN extrusion machine to the control panel, stop production of the 12th product and change to the production of No. 15 "Products", then the production line will stop production, replace the mold, replace the No. 15 product alloy and produce according to its process parameters. Cut off the pressure residue and related waste will be on your own, "run" to go where it should go, the unloaded mold will "run" to clean mode. Or the patrol engineer is not in the control room, he can take the microphone to order. The voice controller can recognize the voice of several inspectors, and the voice of others makes it not listen.